Please fill out the contact form below and we will reply as soon as possible.
Can I use the power button to turn off the system? Yes. Press and hold the power button for about...
November 30th, 2022 531 views 0 likes
This table outlines what the LEDs on the power button indicate: Normal operating modes Stand-by Start-up Operational Shutdown Error modes...
February 5th, 2021 583 views 0 likes
Nureva's touch panel meets the ANSI/NEMA-LD3/2005 standard, which covers the family of products known as high-pressure decorative laminates (HPDL). Nureva...
February 5th, 2021 493 views 0 likes
Nureva supplies a straight 3.5mm jack to RS232 to enable projector-level controls from Nureva Room Manager. The cable is managed...
February 5th, 2021 581 views 0 likes
For the Nureva touch panel's presence detection to work, set your PC's screen power savings settings to: Turn off after:...
February 5th, 2021 442 views 0 likes
The presence detect feature is designed to conserve energy by shutting the WM408i system down when it isn't in use....
No, the WM408i does not come with a stylus. However, the Nureva Wall system is compatible with several off-the-shelf, passive...
February 5th, 2021 534 views 0 likes
The USB cable(s) included with the system are 6' (2 m) long. If you require your USB cables to reach...
February 5th, 2021 586 views 0 likes
We recommend a quality HDMI cable with the following specifications: 4K 60Hz 24 AWG HDR CL3 Having an HDMI cable...
February 5th, 2021 553 views 0 likes
Leveraging the advantage of solid-state illumination we list two numbers: Native contrast ratio 1800:1 This ratio is determined by maintaining...
February 5th, 2021 512 views 0 likes
Nureva Room Manager only recognizes Nureva projectors for the "matching" process. When Cat5e video extenders are used, the projector identification...
February 5th, 2021 476 views 0 likes
You cannot use a different projector with the Nureva Wall and keep the same built-in functionality as the projector included...
February 5th, 2021 474 views 0 likes
The serial number on your WM408i system is located behind the front right cover on your touch panel.
February 5th, 2021 504 views 0 likes
No. DisplayLink USB graphics technology is designed to connect computers to displays, composed of a virtual graphics card (VGC) software...
February 5th, 2021 455 views 0 likes
We recommend using only HDMI cables. While DisplayPort cables can support shorter cable runs, HDMI cables are preferred for longer...
February 5th, 2021 469 views 0 likes
The control module on the Nureva Wall WM408i must be updated manually. To update the control module, follow the steps...
February 5th, 2021 561 views 0 likes
Yes, screen-sharing is available on Nureva Wall. However, touch interactivity will be disabled in this mode. When screen sharing from...
February 5th, 2021 465 views 0 likes